- Hositrad Holland B.V.
- Hositrad - Deutschland
Custom Chambers
We can assist you with chamber concept, application, engineering, and design. We work from your rough sketches, and prepare complete production drawings on our CAD system using the latest version of SolidWorks. The following pages contain photographs and production drawings of chambers we have fabricated. The cheapest chamber may not be the least expensive. To insure you receive exactly what you need, we provide you with complete production drawings for your review and written approval, before fabrication begins. Whichever vendor you choose, we strongly recommend production prints be sent to you for final approval prior to manufacturing. Approved prints minimize the possibility of design and/or manufacturing errors. |
 |
Complete Production Drawings -- Prepared and Submitted for Customer -- Approval Before Fabrication Starts.
| Standard Performance Certification and Documentation Every chamber shipped is certified: *To be leak-free, leak-checked with a helium mass spectrometer to a sensitivity of 2 x 10-10 std. cc/sec. A certificate of compliance is supplied. *Port alignment accurate within ±1°. *Fabricated from type 304(L) stainless steel. *Only sulfur-free water-soluble oils used in machining parts. *Internal or full penetration welds made by TIG welding. *Cleaned, wrapped and packaged for installation upon receipt by the customer. |
 |
| Performance Options At your option and request, we can perform, certify, and document: *Qualification of ultimate base pressures measured to 2 x 13,3-11 Bar, achieved with the system in our facility. Certification of bakeout and pumping techniques employed to achieve specified pressure. *RGA partial pressure analysis to 2 x 13,3-13 Bar from 0 to 200 AMU. *Choice of the conditions under which the system is shipped, e.g., blanked off, under vacuum, bagged with dry nitrogen or other gas of your choice, or a combination of the preceding. *Choice of materials used in fabrication. *Chemical and mechanical processes used to prepare systems and surfaces, such as passivation, electro-polishing, mechanical polishing (up to a #2-lap finish), or chemical removal of carbon and/or hydrogen from the surface. |
 |
